Differences

This shows you the differences between two versions of the page.

--- geda:faq-attribs [2009/01/28 16:08]
sdb
+++ geda:faq-attribs [2012/02/20 15:14]
127.0.0.1 external edit
@@ Line 1: / Line 1: @@
+====== Attribute management ======
+===== Help! My design has hundreds of components, and it's a pain to use gschem to attach all my attributes! =====
+The answer here is the gEDA/gaf utility “gattrib”. Gattrib is an attribute editor for gEDA. It reads your .sch file(s) and creates a spreadsheet showing all components, nets, and pins in rows, with the associated attributes listed in the columns. Gattrib allows you to add, modify, or delete attributes outside of gschem, and then save the .sch files back out. Here’s a screenshot:
+{{:geda:faq_attrib.jpg}}
+Note that gattrib is the gEDA Project’s current answer to the question of heavy symbols. That is, rather than putting all attributes (such as SPICE model files, footprint names, manufacturer part nos and the like), you are encouraged to put this information into your schematic using gattrib, where it is visible and easily manipulable with gattrib.
+When using gattrib, make sure you exit gschem first. Gattrib and gschem both save your work into the same file, so you should have only one program running at a time to avoid conflicts. There is no lockfile mechanism in gEDA/gaf (yet), so it’s your responsibility to avoid conflicts.
+===== How do I know what footprint name to use for layout using PCB? =====
+[[geda:pcb_tips#i_want_to_use_pcb_to_do_layout._how_do_i_know_what_value_to_use_for_the_footprint_attribute|Answered here]].

gEDA Project Wiki

User Tools

Site Tools

Differences

Page Tools