gEDA Project Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Building the gEDA/gaf git repository version ======

===== General Instructions =====

To build the git repository version of gEDA/gaf, follow these instructions:

  * Download and install all the following dependencies.  You will probably want to use your distributions package management system (such as apt-get or yum) to install the dependencies.
    * A C compiler and C standard library ([[ http://gcc.gnu.org/ | GCC ]] and [[ http://www.gnu.org/software/libc/ | GNU Libc ]] are recommended)
    * [[ http://flex.sourceforge.net/ | flex ]] current
    * [[ http://www.gnu.org/software/gawk/ | GNU awk ]] current
    * [[ http://www.gnu.org/software/automake | automake ]] 1.6.x or later
    * [[ http://www.gnu.org/software/autoconf/ | autoconf ]]  2.60 or later
    * [[ http://www.gnu.org/software/libtool/ | libtool ]] current
    * [[ http://www.gnu.org/software/texinfo/ | texinfo ]] current
    * [[ http://pkgconfig.freedesktop.org/wiki | pkg-config ]] current
    * [[ http://www.gnu.org/software/gettext/ | gettext ]]  0.16 or later
    * [[ http://www.gnu.org/software/guile" | guile ]]  1.8.x (1.6.x is no longer supported)
    * [[ http://www.gtk.org/ | gtk+ ]] 2.10.x or later
    * [[ http://www.gnu.org/software/groff/groff.html | groff ]] current
    * [[ http://git-scm.com | git ]] 1.6.x or later
    * [[ http://www.nongnu.org/cvs/ | cvs ]] current
    * [[ http://freedesktop.org/Software/shared-mime-info | freedesktop.org MIME info database ]] current
    * [[ http://www.freedesktop.org/software/desktop-file-utils/releases | freedesktop.org utilities for manipulating .desktop files ]] current

  * It is pretty important to have all of the above programs (especially automake, autoconf, libtool, gtk, and guile) installed in the same prefix (like /usr or /usr/local).  If you do not have them all installed in the same prefix, then building and installing gEDA/gaf is much harder.

  * Clone the source from the official git repository.  For information on how to do this, read the [[ geda:scm | gEDA SCM page ]]

  * Build the software by executing the following commands inside of the newly cloned git repository:<code>
$ ./autogen.sh
$ ./configure --prefix=$HOME/geda
$ make
$ make install
</code>
  * If the above commands execute without **any** error messages, then you have successfully built and installed gEDA/gaf.  If you encounter any errors, be sure to read the README and INSTALL files contained within the tarball.

  * You can now run the various programs in the gEDA suite.  Please read the toplevel README file which describes what is available.

  * gschem is the schematic capture program and can be run by executing: ''PATH_WHERE_gEDA_GAF_IS_INSTALLED/bin/gschem''

  * It is recommended that you add ''PATH_WHERE_gEDA_GAF_IS_INSTALLED/bin'' to your PATH environment variable (typically done by modifying one of the following files: ''$HOME/.bashrc'', ''$HOME/.bash_profile'', or ''$HOME/.profile'').

  * It is highly recommended that you read the gEDA documentation at this point.  You can access the gEDA documentation by running gschem and select Help/gEDA Documentation... from the top menu.

  * If you want to get gEDA/gaf repository commit log e-mail messages, please subscribe to the geda-cvs mailing list.  Please see the [[ geda:mailinglists | mailing lists page ]] for info on how to do this.

  * For build problems, please be sure to read the [[ geda:mailinglists | mailing list archives ]] or [[ http://www.geda-project.org/search.html | search ]] this site.  Also look at the [[ :start | gEDA wiki ]] for more hints.

===== Distro-specific information =====

==== Debian-based ====

This is tested on [[http://crunchbanglinux.org/|Crunchbang Linux]] but should work on Debian and Ubuntu also.

  - Install the build dependencies for the packaged version of gEDA:<code>
$ sudo apt-get build-dep geda
</code>
  - Install the texinfo package:<code>
$ sudo apt-get install texinfo
</code>
  - If you want to generate doxygen output, install it:<code>
$ sudo apt-get install doxygen
</code>
  - Clone the source from the official git repository.  For information on how to do this, read the [[ geda:scm | gEDA SCM topic ]].
  - From inside the newly cloned repository, build gEDA/gaf:<code>
$ ./autogen.sh
$ ./configure --prefix=$HOME/geda [--enable-doxygen]
$ make
$ make install
</code>


==== MacPorts ====

[[http://www.macports.org/|MacPorts]] is an open-source community initiative to design an easy-to-use system for compiling, installing, and upgrading open-source software on the Mac OS X operating system. MacPorts has a packaged installation of gEDA/gaf but occasionally one needs a more up-to-date version (such as that from git). The easiest way to build from git HEAD on MacPorts is to install the packaged version (at time of writing, 1.6.2) as a way of bringing most of the dependencies into the MacPorts tree.

  - [[http://www.macports.org/install.php|Install MacPorts]].
  - Install the MacPorts-packaged version of gEDA/gaf. As a happy side-effect, this brings in the build prerequisites:<code>
$ sudo port install geda-gaf
</code>
  - If you want to generate doxygen output, install doxygen:<code>
$ sudo port install doxygen
</code>
  - Clone the source from the official git repository.  For information on how to do this, read the [[ geda:scm | gEDA SCM topic ]].
  - From inside the newly cloned repository, build gEDA/gaf:<code>
$ ./autogen.sh
$ ./configure --prefix=$HOME/geda --disable-update-xdg-database [--enable-doxygen]
$ make
$ make install
</code>
  - To run the software, you need to set an environment variable to allow Guile to load its shared libraries:<code>
$ export LTDL_LIBRARY_PATH=/opt/local/lib
$ gschem
</code>
gEDA Project Wiki

User Tools

Site Tools

Page Tools
