geda:icarus_mp
Icarus Verilog compiler man-page
iverilog(1) $Date: 2005/06/28 04:25:55 $ iverilog(1)
NAME
iverilog - Icarus Verilog compiler
SYNOPSIS
iverilog [-ESVv] [-Bpath] [-ccmdfile] [-g1|-g2|-g2x] [-Dmacro[=defn]]
[-pflag=value] [-Iincludedir] [-mmodule] [-Mfile] [-Nfile] [-ooutput-
filename] [-stopmodule] [-ttype] [-Tmin/typ/max] [-Wclass] [-ypath]
sourcefile
DESCRIPTION
iverilog is a compiler that translates Verilog source code into exe-
cutable programs for simulation, or other netlist formats for further
processing. The currently supported targets are vvp for simulation, and
xnf and fpga for synthesis. Other target types are added as code gener-
ators are implemented.
OPTIONS
iverilog accepts the following options:
-Bbase The iverilog program uses external programs and configuration
files to preprocess and compile the Verilog source. Normally,
the path used to locate these tools is built into the iverilog
program. However, the -B switch allows the user to select a
different set of programs. The path given is used to locate
ivlpp, ivl, code generators and the VPI modules.
-cfile This flag specifies an input file that contains a list of Ver-
ilog source files. This is similar to the command file of other
Verilog simulators, in that it is a file that contains the file
names instead of taking them on the command line. See Command
Files below.
-Dmacro Defines macro macro with the string ‘1’ as its definition. This
form is normally only used to trigger ifdef conditionals in the
Verilog source.
-Dmacro=defn
Defines macro macro as defn.
-E Preprocess the Verilog source, but do not compile it. The out-
put file is the Verilog input, but with file inclusions and
macro references expanded and removed. This is useful, for
example, to preprocess Verilog source for use by other compil-
ers.
-g1|-g2|-g2x
Select the Verilog language generation to support in the com-
piler. This selects between IEEE1364-1995(1), IEEE1364-2001(2),
or Verilog with extension(2x). Normally, Icarus Verilog
defaults to the latest known generation of the language. This
flag is most useful to restrict the language to a set supported
by tools of specific generations, for compatibility with other
tools.
-Iincludedir
Append directory includedir to list of directories searched for
Verilog include files. The -I switch may be used many times to
specify several directories to search, the directories are
searched in the order they appear on the command line.
-Mpath Write into the file specified by path a list of files that con-
tribute to the compilation of the design. This includes files
that are included by include directives and files that are
automatically loaded by library support. The output is one file
name per line, with no leading or trailing space.
-mmodule
Add this module to the list of VPI modules to be loaded by the
simulation. Many modules can be specified, and all will be
loaded, in the order specified. The system module is implicit
and always included.
-Npath This is used for debugging the compiler proper. Dump the final
netlist form of the design to the specified file. It otherwise
does not affect operation of the compiler. The dump happens
after the design is elaborated and optimized.
-o filename
Place output in the file filename. If no output file name is
specified, iverilog uses the default name a.out.
-pflag=value
Assign a value to a target specific flag. The -p switch may be
used as often as necessary to specify all the desired flags.
The flags that are used depend on the target that is selected,
and are described in target specific documentation. Flags that
are not used are ignored.
-S Synthesize. Normally, if the target can accept behavioral
descriptions the compiler will leave processes in behavioral
form. The -S switch causes the compiler to perform synthesis
even if it is not necessary for the target. If the target type
is a netlist format, the -S switch is unnecessary and has no
effect.
-s topmodule
Specify the top level module to elaborate. Icarus Verilog will
by default choose modules that are not instantiated in any
other modules, but sometimes that is not sufficient, or instan-
tiates too many modules. If the user specifies one or more root
modules with -s flags, then they will be used as root modules
instead.
-Tmin|typ|max
Use this switch to select min, typ or max times from
min:typ:max expressions. Normally, the compiler will simply use
the typ value from these expressions (with a warning) but this
switch will tell the compiler explicitly which value to use.
This will suppress the warning that the compiler is making a
choice.
-ttarget
Use this switch to specify the target output format. See the
TARGETS section below for a list of valid output formats.
-v Turn on verbose messages. This will print the command lines
that are executed to perform the actual compilation, along with
version information from the various components, as well as the
version of the product as a whole. You will notice that the
command lines include a reference to a key temporary file that
passes information to the compiler proper. To keep that file
from being deleted at the end of the process, provide a file
name of your own in the environment variable IVERILOG_ICONFIG.
-V Print the version of the compiler, and exit.
-Wclass Turn on different classes of warnings. See the WARNING TYPES
section below for descriptions of the different warning groups.
If multiple -W switches are used, the warning set is the union
of all the requested classes.
-ylibdir
Append the directory to the library module search path. When
the compiler finds an undefined module, it looks in these
directories for files with the right name.
MODULE LIBRARIES
The Icarus Verilog compiler supports module libraries as directories
that contain Verilog source files. During elaboration, the compiler
notices the instantiation of undefined module types. If the user speci-
fies library search directories, the compiler will search the directory
for files with the name of the missing module type. If it finds such a
file, it loads it as a Verilog source file, they tries again to elabo-
rate the module.
Library module files should contain only a single module, but this is
not a requirement. Library modules may reference other modules in the
library or in the main design.
TARGETS
The Icarus Verilog compiler supports a variety of targets, for differ-
ent purposes, and the -t switch is used to select the desired target.
null The null target causes no code to be generated. It is useful
for checking the syntax of the Verilog source.
vvp This is the default. The vvp target generates code for the vvp
runtime. The output is a complete program that simulates the
design but must be run by the vvp command.
xnf This is the Xilinx Netlist Format used by many tools for plac-
ing devices in FPGAs or other programmable devices. This target
is obsolete, use the fpga target instead.
fpga This is a synthesis target that supports a variety of fpga
devices, mostly by EDIF format output. The Icarus Verilog fpga
code generator can generate complete designs or EDIF macros
that can in turn be imported into larger designs by other
tools. The fpga target implies the synthesis -S flag.
WARNING TYPES
These are the types of warnings that can be selected by the -W switch.
All the warning types (other then all) can also be prefixed with no- to
turn off that warning. This is most useful after a -Wall argument to
suppress isolated warning types.
all This enables all supported warning categories.
implicit
This enables warnings for creation of implicit declarations.
For example, if a scalar wire X is used but not declared in the
Verilog source, this will print a warning at its first use.
portbind
This enables warnings for ports of module instantiations that
are not connected but probably should be. Dangling input ports,
for example, will generate a warning.
timescale
This enables warnings for inconsistent use of the timescale
directive. It detects if some modules have no timescale, or if
modules inherit timescale from another file. Both probably mean
that timescales are inconsistent, and simulation timing can be
confusing and dependent on compilation order.
SYSTEM FUNCTION TABLE FILES
If the source file name as a .sft suffix, then it is taken to be a sys-
tem function table file. A System function table file is used to
describe to the compiler the return types for system functions. This is
necessary because the compiler needs this information to elaborate
expressions that contain these system functions, but cannot run the
sizetf functions since it has no run-time.
The format of the table is ASCII, one function per line. Empty lines
are ignored, and lines that start with the ’#’ character are comment
lines. Each non-comment line starts with the function name, then the
vpi type (i.e. vpiSysFuncReal). The following types are supported:
vpiSysFuncReal
The function returns a real/realtime value.
vpiSysFuncInt
The function returns an integer.
vpiSysFuncSized <wid> <signed|unsigned>
The function returns a vector with the given width, and is
signed or unsigned according to the flag.
COMMAND FILES
The command file allows the user to place source file names and certain
command line switches into a text file instead of on a long command
line. Command files can include C or C++ style comments, as well as #
comments, if the # starts the line.
file name
A simple file name or file path is taken to be the name of a
Verilog source file. The path starts with the first non-white-
space character. Variables are substitued in file names.
-y libdir
A -y token prefixes a library directory in the command file,
exactly like it does on the command line. The parameter to the
-y flag may be on the same line or the next non-comment line.
Variables in the libdir are substituted.
+incdir+includedir
The +incdir+ token in command files gives directories to search
for include files in much the same way that -I flags work on
the command line. The difference is that multiple +includedir
directories are valid parameters to a single +incdir+ token,
although you may also have multiple +incdir+ lines.
Variables in the includedir are substituted.
+libext+ext
The +libext token in command files fives file extensions to try
when looking for a library file. This is useful in conjunction
with -y flags to list suffixes to try in each directory before
moving on to the next library directory.
+libdir+dir
This is another way to specify library directories. See the -y
flag.
+libdir-nocase+dir
This is like the +libdir statement, but file names inside the
directories declared here are case insensitive. The missing
module name in a lookup need not match the file name case, as
long as the letters are correct. For example, "foo" matches
"Foo.v" but not "bar.v".
+define+NAME=value
The +define+ token is the same as the -D option on the command
line. The value part of the token is optional.
+toupper-filename
This token causes file names after this in the command file to
be translated to uppercase. This helps with situations where a
directory has passed through a DOS machine, and in the process
the file names become munged.
+tolower-filename
This is similar to the +toupper-filename hack described above.
VARIABLES IN COMMAND FILES
In certain cases, iverilog supports variables in command files. These
are strings of the form "$(varname)", where varname is the name of the
environment variable to read. The entire string is replaced with the
contents of that variable. Variables are only substitued in contexts
that explicitly support them, including file and directory strings.
Variable values come from the operating system environment, and not
from preprocessor defines elsewhere in the file or the command line.
EXAMPLES
These examples assume that you have a Verilog source file called
hello.v in the current directory
To compile hello.v to an executable file called a.out:
iverilog hello.v
To compile hello.v to an executable file called hello:
iverilog -o hello hello.v
To compile and run explicitly using the vvp runtime:
iverilog -ohello.vvp -tvvp hello.v
To compile hello.v to a file in XNF-format called hello.xnf
iverilog -txnf -ohello.xnf hello.v
AUTHOR
Steve Williams (steve@icarus.com)
SEE ALSO
vvp(1), <http://www.icarus.com/eda/verilog/>
COPYRIGHT
Copyright © 2002 Stephen Williams
This document can be freely redistributed according to the terms of the
GNU General Public License version 2.0
Version $Date: 2005/06/28 04:25:55 $ iverilog(1)
geda/icarus_mp.txt · Last modified: 2012/02/20 15:14 (external edit)
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
